If you use the headphones that came with your player and don't listen to that much music, 128kbps will probably suffice for you. The happy medium between small file sizes and true CD quality audio. Is a unique mix of high strategy and terrifyingly realistic simulation. Can you infect the world? Your pathogen has just infected 'Patient Zero'. Now you must bring about the end of human history by evolving a deadly, global Plague whilst adapting against everything humanity can do to defend itself. With no worries about connectivity, you can relax and enjoy the music. A couple of options for downloading music free are MP3Jam., and Frostwire. Great apps and easy to work with. Just download the app, search for your favorite music, then download your favorite songs or albums to your device. Now you are ready to listen and enjoy.
By default the IP Office will use internal music on hold by uploading a music file from the IP Office Manager PC. For IP500 V2 systems, you can load a file onto the System SD card prior to installing it in the IP Office.
The file must be of the following format and must be calledholdmusic.wav.
Audio sample size
Audio Sample Rate
Up to 90 seconds.
To loading a music on hold file onto a System SD card
|2.||Using a card reader, copy the file into the/system/primaryfolder on the System SD memory card.|
|3.||If the IP Office is or will be configured for additional hold music files (up to 3 additional files), copy those files to the same location. The name of the additional files must match those specified in the IP Office system's configuration.|
When you create/convert new MOH file, before attempting to load it onto the system, don't forget to check file properties again and verify if they conform to requirements.
Sysmon trace taken while uploading new file (with default filters) will show if there are any problems loading new file, for example:
11:53:13 71815916mS FILESYS: (34) FilesysReader: Written: A:SYSTEMPRIMARYholdmusic.wav
11:53:14 71816098mS PRN: MOH: A:systemprimaryHoldMusic.wav updated on card
11:53:14 71816098mS PRN: WAVFileReader - reload file holdmusic.wav
11:53:14 71816202mS PRN: Read hold music HoldMusic.wav from memory card
11:53:18 71820849mS PRN: WAVFileReader::Read:File too big
10:03:49 1217835473mS PRN: WAV Hold Music HoldMusic.wav failed to load
Note: For more details, please visit this link: http://marketingtools.avaya.com/knowledgebase/businesspartner/ipoffice/mergedProjects/installation/adding_a_music_on_hold_file_2.htm
Everybody wants great audio, but sometimes our quests for improvement lead us down some really dark and… dumb… corridors. As it is with many disciplines, with music a little knowledge goes a long way. You may have seen discussion online surrounding bit depth and sample rates, but what you probably don’t know is that there isn’t some magic setting that’ll make everything sound better. That’s because digital music as it is today has already left our perceptual limits in the rear-view mirror. You don’t need crazy-high quality files unless you’re creating music that needs heavy editing.
While I’m no stranger to delivering bad news, like any good journalist I show my evidence. The truth of the matter is that humans just can’t perceive the difference between files at a certain point, and you shouldn’t get sucked into the marketing hype if it’s more expensive than what you have already. While I have no doubt that formats like MQA are technologically impressive, most won’t really be able to appreciate the increased fidelity. Chances are near 100% that your current library is perfectly fine.
If you’ve looked at your music player’s information tab, you may notice some of your songs have sample rates of 44.1kHz, or 48kHz. You may also notice that your DAC or a phone like the LG V30 support files with sample rates up to 384kHz.
That’s overkill. Nobody on God’s green Earth is going to know or care about the difference because our ears just aren’t that sensitive. Don’t believe me? It’s time for some math. To understand what the limit of human perception is for sample rates, we need to identify three things:
Sounds simple enough, and it is. The most common range of human hearing tops out at about 20kHz, which is 20,000 periods per second. For the sake of argument, let’s expand that range to the uppermost limits of what we know is possible: 22kHz. If you want to check out the limits of your hearing, use this tool to find the upper limits of your perception. Just be sure you don’t set the volume too loud before you do it. If you’re over 20, that number should be about 16-17kHz, lower if you’re over 30, and so on.
If your hearing can't reach anything higher than 22.05kHz, then the 44.1kHz file can outresolve the range of frequencies you can hear.
Using the Nyquist-Shannon sampling theorem, we know that a sample rate that provides two samples per period is sufficient to reproduce a signal (in this case, your music). 2 x 22,000 = 44,000, or just under the 44,100 samples per second offered by a 44.1kHz sample rate. Anything above that number is not going to offer you much improvement because you simply can’t hear the frequencies that an increased sample rate would unlock for you.
Any sample rate that exceeds twice the frequency will be perfectly represented (above). It’s only when the sample rate drops below that point where problems arise (below).
Additionally, the frequencies you hear at the highest end diminish over time as you age, get ear infections, or are exposed to loud sounds. For example, I can’t hear anything above 16kHz. This is why to older ears, music has less audible distortion if you use a low-pass filter to get rid of sound that you can’t hear—it’ll make your music sound better even though it’s not technically as “high-def” as the original file. If your hearing can’t reach anything higher than 22.05kHz, then the 44.1kHz file can handily outresolve the range of frequencies you can hear.
The other audio quality myth is that 24-bit audio will unlock some sort of audiophile nirvana because it’s that much more data-dense, but in terms of perceptual audio any improvement will be lost on human ears. Capturing more data per sample does have benefits for dynamic range, but the benefits are pretty much exclusively in the domain of recording.
Though it’s true a 24-bit file will have much more dynamic range than a 16-bit file, 144dB of dynamic range is enough to resolve a mosquito next to a Saturn V rocket launch. While that’s all well and good, your ears can’t hear that difference in sound due to a phenomenon called auditory masking. Your physiology makes quieter sounds muted by louder ones, and the closer they are in frequency to each other: the more they’re masked out by your brain. With enhancements like dithering, 16-bit audio can “merely” resolve the aforementioned mosquito next to a 120dB jet engine takeoff. Still dramatic overkill.
This is what a 24-bit music file looks like before any data is removed. Frequency is the Y-axis, time is the X axis, and intensity is color.
However, it’s the quieter sounds that many audiophiles claim is the big difference, and that’s partially true. For example, a wider dynamic range allows you to raise the volume farther without raising audible noise, and that’s the big sticking point here. Where 24 and even 32-bit files have their place in the mixing booth, do they offer any benefit for MP3, FLAC, or OGG files?
While my colleague Rob at Android Authorityalready proved this with an oscilloscope and some hardcore research, we’re going to perform an experiment that you can do yourself—or just read if you don’t mind spoilers. After scouring the web, I found a couple files on Bandcamp that were actually released in 24-bit lossless files. Many of the ones I found on purported “HD Audio” sites were simply upconverted from 16-bit, meaning they were identical in every way but price. Next, I followed this procedure:
Essentially what we just did here is take a 96kHz/24-bit file, then subtract all the data that you can hear in a CD-quality version of itself. What’s left is the difference between the two! This is the exact same principle that Active Noise Canceling is based on. This is the result I got:
While those little purple bits are visible in the spectrogram, they’re well below the threshold of audibility in the presence of music.
Okay, so there’s a bit of difference in the uppermost reaches of the file, but that’s out of the range of human hearing. In fact, you should probably just filter that out anyway. So let’s show what a human can actually hear by applying a low pass at 20kHz just to cover our bases. Et voila: a final peak of… -85dB at best. Okay, we’re kinda skirting the edges of audibility here, but here’s the problem—in order to actually hear any of this extra data, you need to:
While that last point may seem a bit snarky, we know that your brain filters out sounds that are close in frequency to each other (see: auditory masking, linked above). So when you’re listening to music, you’re actually not hearing all the sound at once, you’re just hearing what your brain has separated out for you. So in order to hear the difference between 24-bit/96kHz files and CD-quality audio: the individual sounds can only occupy a very narrow frequency range, be very loud, and the other notes that occur in the same time period must be vary far apart in terms of frequency.
There is no safe listening level to hear the difference between these files.
If we’ve learned anything from this Yanny/Laurel fiasco, a human voice does not fit these criteria (Editor’s note: It’s “Laurel”). So really, the most likely places you’d actually be able to hear the differences between the two are in low frequency notes with somewhat muted harmonics. But there’s a catch: Humans are really bad at hearing low-frequency sounds. In order to hear these notes at equal loudness to higher-frequency notes, you’ll need anywhere from 10 to 40dB of extra power. So those peaks at -87dB in ranges from 20-90Hz may as well be -97 to -127dB, which is outside the range of human hearing. There is no safe listening level to hear the difference between these files.
Cool, huh? It’s always good to know that anyone coming along and telling you that your music collection has to be re-bought because it’s not “high-def” enough is demonstrably wrong. If you’re a budding audiophile, the thing you need to take away from this is to relax: we’re in a golden age of audio here—CD quality is more than fine enough, just enjoy your music! While some may seek higher-quality audio, it’s not necessary if all you want to do is listen to good music.